Connecting To The Network Through Lan Interface; Connecting To A Wireless Lan; Plugging In The Receiver - Pioneer VSX-1021-K Guía De Inicio Rápida

1 Connect a pair of speakers to the
surround back speaker terminals.
2 VSX-1021 only: Connect a TV monitor
to the VIDEO ZONE 2 OUT jack on this
receiver.
Connecting to the network
through LAN interface
By connecting this receiver to the network via
the LAN terminal, you can listen to Internet
radio stations. To listen to Internet radio sta-
tions, you must sign a contract with an ISP
(Internet Service Provider) beforehand.
When connected in this way, you can play audio
files stored on the components on the network,
including your computer, using HOME MEDIA
GALLERY inputs.
Connect the LAN terminal on this receiver to
the LAN terminal on your router (with or with-
out the built-in DHCP server function) with a
straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your
router. In case your router does not have the
built-in DHCP server function, it is necessary
to set up the network manually. For details, see
Network Setup menu on Operating Instructions
in CD-ROM.
LAN terminal specifications
LAN terminal : Ethernet jack
(10BASE-T/100BASE-TX)
Note
Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may differ
depending on your Internet environment.
When using a broadband Internet connection,
a contract with an Internet service provider
is required. For more details, contact your
nearest Internet service provider.

Connecting to a wireless LAN

Wireless connection to the network is possible
through a wireless LAN connection. Use the
separately sold AS-WL300 for connection.
✝ ✶ ✞ ✴ ✶ ✞ ✞ ✟
▲ ✠ ◆
✭ ❯ ✁ ✂ ❯ ✁ ✺ ❱ ✵ ✳ ✻ ✄ ▼ ✄ ☎ ✆
❆ ❉ ❆ € ❚ ❊ ❘ € ❖ ❘ ❚
■ ✡ ☛ ☞ ✌ ✡ ☞ ☛
❳ ✮
✍ ✎ ✏ ☞ ✑
✤ ✎ ♦ ☛ ☞ ✌
❲ ✐ ✌ ☞ ✒ ☞ ✓ ✓ ✔ ✕ ✖ ✗ ✎ ✡ ✘ ☞ ✌ ☛ ☞ ✌ ✙ ✕ ✚ ✛ ❲ ✔ ✜ ✢ ✢ ✣

Plugging in the receiver

Only plug in after you have connected all your
components to this receiver, including the
speakers.
CAUTION
Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord, and
never touch the power cord when your hands
are wet, as this could cause a short circuit or
electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or
pinch the cord in any other way. Never make
a knot in the cord or tie it with other cables.
The power cords should be routed so that they
Connecting your equipment
are not likely to be stepped on. A damaged
power cord can cause a fire or give you an
electric shock. Check the power cord once in a
while. If you find it damaged, ask your nearest
Pioneer authorized independent service
company for a replacement.
Do not use any power cord other than the one
supplied with this unit.
Do not use the supplied power cord for any
purpose other than that described below.
The receiver should be disconnected by
removing the mains plug from the wall
socket when not in regular use, e.g., when on
vacation.
1 Plug the supplied power cord into the
AC IN socket on the back of the receiver.
2 Plug the other end into a power outlet.
After this receiver is connected to an AC
outlet, a 2 second to 10 second HDMI
initialization process begins. You cannot
carry out any operations during this process.
The HDMI indicator in the front panel display
blinks during this process, and you can turn
on this receiver once it has stopped blinking.
When you set the Control with HDMI to
OFF, you can skip this process. For details
about the Control with HDMI feature, see
Control with HDMI function on Operating
Instructions in CD-ROM.
02
15
En