Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting a TV and playback
components
HDMI/DVI-compatible TV
HDMI/DVI-compatible
Blu-ray DIsc player
HDMI OUT
HDMI IN
BD IN
IN
4
IN
6
OUT
LAN
(10/100)
OPTICAL
HDMI
IN
1
IN
2
IN
3
BD IN
IN
4
IN
6
OUT
DC OUTPUT
for WIRELESS LAN
ASSIGNABLE
1 6
-
(DVD)
(SAT/CBL)
(DVR/BDR)
OUTPUT 5 V
(
0.6 A MAX
)
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable (
A
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel function,
the sound of the TV is input to the receiver via the HDMI
terminal, so there is no need to connect an
cable (
). In this case, set ARC at HDMI Setup to ON
A
l
"
HDMI Setup
"
4
Connecting antennas
DIGITAL OUT
OPTICAL
A
Connecting to the network through
OPTICAL
ASSIGN-
ABLE
LAN interface
IN
1
IN
2
( TV )
( DVR/BDR )
ASSIGN-
COAXIAL
ABLE
ASSIGNABLE
IN
1
IN
2
IN
1
IN
2
(TV)
(DVR/BDR)
(DVD) (SAT/CBL)
) connection is required to
optical digital
AM loop antenna
1
2
ANTENNA
AM LOOP
ANTENNA
AM LOOP
FM UNBAL
75
FM UNBAL
75
FM wire antenna
Internet
Modem
PC
LAN cable (sold separately)
LAN
(10/100)
LAN
( 10/100 )
Note
• Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
• Refer to the operating instructions in the included CD-
ROM for other device connections.
CAUTION
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
VENTILATION CAUTION
When installing this unit, make sure to leave space
Router
around the unit for ventilation to improve heat radiation
WAN
(at least 40 cm at top, 10 cm at rear, and 20 cm at each
side).
LAN
WARNING
1
Slots and openings in the cabinet are provided for
2
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
3
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
Connecting up (continued)
D3-4-2-1-7b*_A1_En
Tabla de contenido
