Connecting A Tv And Playback Components; Connecting Antennas; Connecting To The Network Through Lan Interface - Pioneer VSX-1023-K Manual De Instrucciones

Connecting a TV and playback
components
VSX-823
B
A
OPTICAL
HDMI IN VIDEO IN
DIGITAL AUDIO OUT
HDMI/DVI-compatible TV
• VSX-523 only: Composite video cable (
necessary in order to see the OSD of the unit on the TV.
• VSX-1023/VSX-823 only: The OSD will only be output from
the HDMI OUT terminal.
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable ( ) connection is required to
B
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an
digital cable ( ) . In this case, set ARC at HDMI Setup to
B
ON  "The HDMI Setup menu" on page 32 (VSX-523),
"HDMI Setup" on page 52 (VSX-1023/VSX-823)
• Please refer to the TV's operation manual for directions on
connections and setup for the TV.

Connecting antennas

1
VSX-823
Connecting to the network through
LAN interface
VSX-1023/VSX-823 only
HDMI OUT
Internet
HDMI/DVI-compatible
Blu-ray Disc player, etc.
) connection is
PC
A
LAN cable (sold separately)
optical
AM loop antenna
2
FM wire antenna
Modem
Router
WAN
LAN
1
2
3
VSX-823
Connecting up (continued)
Note
• Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
• Refer to the operating instructions in the included CD-
ROM for other device connections.
CAUTION
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
VENTILATION CAUTION
When installing this unit, make sure to leave space around the
unit for ventilation to improve heat radiation (at least 40 cm at
top, 20 cm at rear, and 20 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product, and to protect it
from overheating. To prevent fire hazard, the openings should
never be blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the equipment on thick
carpet or a bed.
D3-4-2-1-7b*_A1_En
3