Remote Control - Pioneer VSX-1021-K Guía De Inicio Rápida

Interactive Manual – Automatically displays
the pages explaining the functions that have
been operated on the receiver. It is also
possible to operate the receiver from the
Interactive Manual.
Glossary – Displays glossary pages.
MCACC Appli – Displays Advanced
MCACC measurement results vividly on the
computer.
There are special operating instructions
for MCACC Application. These instructions
are included in the AVNavigator
Interactive Manual's menus. Refer to them
when using MCACC Application.
Software Update – Allows various types of
software to be updated.
Settings – Used to make various
AVNavigator settings.
Detection – Used to detect the receiver.
Note
To use the AVNavigator of another model, first
uninstall (delete) this receiver's AVNavigator,
then install the AVNavigator of the other model.
Deleting the AVNavigator
You can use the following method to uninstall
(delete) the AVNavigator from your PC.
Delete from the Control Panel of the
PC.
From the Start menu, click "Program"
"PIONEER CORPORATION"
"AVNavigator(VSX-1021 or VSX-921)"
"Uninstall".

Remote control

This section explains how to operate the remote
control for the receiver.
The remote has been conveniently color-coded
according to component control using the follow-
ing system:
White – Receiver control, TV control
Blue – Other controls (See the Operating
Instructions in CD-ROM for detail.)
1 RECEIVER
This switches between standby and on for this
receiver.
2 MULTI OPERATION
Use this button to perform multi operations.
3 RCU SETUP
Use to input the preset code when making
remote control settings and to set the remote
control mode.
4 Input function buttons
Press to select control of other components.
Use INPUT SELECT / to select the input
function (page 19).
5 ZONE 2
Switch to perform operations in ZONE 2.
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button.
7 Receiver setting buttons
Press first to access:
AUDIO PARAMETER – Use to access the
Audio options.
VIDEO PARAMETER – Use to access the
Video options.
HOME MENU – Use to access the Home
Menu.
RETURN – Press to confirm and exit the
current menu screen.
8 / / / /ENTER
Use the arrow buttons when setting up your
surround sound system and the Audio or Video
options.
9 Receiver Control buttons
Press first to access:
PHASE CTRL – Press to switch on/off Phase
Control.
STATUS – Press to check selected receiver
settings.
PQLS – Press to select the PQLS setting.
Before you start
S.RETRIEVER – Press to restore CD quality
sound to compressed audio sources.
SIGNAL SEL – Use to select an input signal.
MCACC – Press to switch between MCACC
presets.
SLEEP – Use to put the receiver in sleep
mode and select the amount of time before
sleep.
CH LEVEL – Press repeatedly to select a
channel, then use / to adjust the level.
A.ATT – Attenuates (lowers) the level of an
analog input signal to prevent distortion.
DIMMER – Dims or brightens the display.
10 LISTENING MODE controls
AUTO/ALC/DIRECT – Switches between
Auto Surround, Auto Level Control mode and
Stream Direct mode.
STEREO – Press to select stereo playback
mode.
STANDARD – Press for Standard decoding
and to switch various modes (2 Pro Logic,
Neo:6, etc.) (page 19).
ADV SURR – Use to switch between the
various surround modes (page 19).
11 Remote control LED
Lights when a command is sent from the
remote control.
12 TV CTRL
Set the preset code of your TV's manufacturer
when controlling the TV.
13
Switches the remote to control the receiver
(used to select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.
14 MASTER VOLUME +/–
Use to set the listening volume.
15 MUTE
Mutes the sound or restores the sound if it has
been muted (adjusting the volume also restores
the sound).
01
5
En