Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting a TV and playback
components
HDMI/DVI-compatible TV
HDMI/DVI-compatible
Blu-ray DIsc player
HDMI OUT
HDMI IN
BD IN
IN
2
IN
3
IN
4
IN
6
IN
7
( SAT/CBL )
( DVR/BDR )
(VIDEO)
IN
1
BD IN
IN
2
IN
3
IN
4
IN
6
IN
7
(OUTPUT 5 V
HDMI
OUT 2
OUT 1
(HD ZONE)
(DVD)
(SAT/CBL)
(DVR/BDR)
(VIDEO)
(CONTROL)
0.6 A MAX)
ASSIGNABLE
DC OUTPUT
1
-
7
SELECTABLE
LAN
(10/100)
for WIRELESS LAN
COAXIAL
IN
1
IN
2
(DVD)
(SAT/CBL)
ASSIGNABLE
IN
1
(TV)
ASSIGNABLE
IN
2
(DVR/BDR)
OPTICAL
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable (
A
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel function,
the sound of the TV is input to the receiver via the HDMI
terminal, so there is no need to connect an optical digital
cable (
). In this case, set ARC at HDMI Setup to ON
A
"
HDMI Setup
"
• Please refer to the TV's operation manual for directions on
connections and setup for the TV.
4
Connecting antennas
a
AM loop antenna
DIGITAL OUT
OPTICAL
A
Connecting to the network through
(OUTPUT 5 V
OUT 1
0.6 A MAX)
(CONTROL)
LAN interface
DC OUTPUT
LAN
(10/100)
for WIRELESS LAN
COAXIAL
IN
2
( SAT/CBL )
NABLE
IN
1
( TV )
ASSIGNABLE
IN
2
( DVR/BDR )
OPTICAL
Computer
) connection is required to
l
b
c
FM wire
antenna
3
AM LOOP
FM UNBAL 75
ANTENNA
4
1
2
IN
BD IN
IN
IN
IN
HDMI
OUT 2
(DVD)
1
(SAT/CBL)
2
(DVR/BDR)
3
(VIDEO)
4
(HD ZONE)
ASSIGNABLE
1
-
7
SELECTABLE
AM LOOP
FM UNBAL 75
ANTENNA
Internet
Modem
LAN cable (sold separately)
LAN
(10/100)
LAN
( 10/100 )
Note
• Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
• Refer to the operating instructions in the included CD-
ROM for other device connections.
CAUTION
5
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
IN
IN
6
7
OUT 1
(CONTROL)
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
Router
WAN
VENTILATION CAUTION
When installing this unit, make sure to leave space
LAN
around the unit for ventilation to improve heat radiation
1
(at least 20 cm at top, 10 cm at rear, and 20 cm at each
2
side).
3
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
Connecting up (continued)
D3-4-2-1-7b*_A1_En
Tabla de contenido
