Tabla de contenido
Código
PID(P)
de fallo y
SPN
SID(S)
luz de ad-
(S)
FMI
vertencia
FMI
146
P110
110
YELLOW
0
0
151
P110
110
RED
0
0
153
P105
105
YELLOW
3
3
154
P105
105
YELLOW
4
4
155
P105
105
RED
0
0
P050
876
191
11
11
234
P190
190
RED
0
0
235
P111
111
MAINT.
1
1
241
P084
084
YELLOW
2
2
242
P084
084
YELLOW
10
10
243
P121
513
NONE
4
4
245
S033
647
NONE
4
4
Causa
Coolant temperature signal indicates
coolant temperature has exceeded
the minimum engine protection limit.
Coolant temperature signal indicates
coolant temperature has exceeded
the maximum engine protection limit.
High voltage detected at intake ma-
nifold temperature signal pin 34 of the
engine harness.
Low voltage detected at intake ma-
nifold temperature signal pin 34 of the
engine harness.
Intake manifold temperature signal
indicates intake manifold tempera-
ture is above the maximum engine
protection limit.
A/C Clutch drive signal indicates a
short to ground when commanded
on.
Engine speed signal indicates engine
speed has exceeded the overspeed
limit.
Coolant level signal at pin 37 of the
engine harness indicates coolant le-
vel is low.
Vehicle speed signal on pins 8 and
18 of the OEM harness has been lost.
Invalid or inappropriate vehicle
speed signal indicated on pins 8 and
18 of the OEM harness indicating con-
nection or possible tampering.
Error detected in the exhaust brake
relay enable control circuit at pin 42
of the engine harness.
Error detected in the fan clutch relay
enable circuit at pin 31 of the engine
harness.
Efectos
Power derate and possible engine
shutdown if engine protection shutdown
feature is enabled.
Speed derate and possible engine
shutdown if engine protection shutdown
feature is enabled.
Default value used for intake manifold
temperature.
No engine protection for intake manifold
temperature.
Default value used for intake manifold
temperature.
No engine protection for intake manifold
temperature.
Speed derate and possible engine
shutdown if engine protection shutdown
feature is enabled.
Can not turn on A/C.
Fuel to injectors disabled until engine
speed falls below the overspeed limit.
Power derate and possible engine
shutdown if engine shutdown feature is
enabled.
Engine speed limited to "Max. Engine
Speed without VSS". Cruise control,
gear-down protection and the road speed
governor will not work. Trip information
data that is based on mileage will be in-
correct.
Engine speed limited to "Max. Engine
Speed without VSS". Cruise control,
gear-down protection and the road speed
governor will not work. Trip information
data that is based on mileage will be in-
correct.
Exhaust brake will not work.
Electronic control module (ECM) can not
control the engine cooling fan. Fan will
remain on or off.
D 57
Tabla de contenido
