Reprocessing The Mask Between Patients; Technical Specifications - ResMed Air Fit F10 Guia Del Usuario

Reprocessing the mask between patients

This mask should be reprocessed when used between
patients. Cleaning, disinfection and sterilisation instructions
are available from the ResMed website,
www.resmed.com/masks/sterilization. If you do not have
internet access, please contact your ResMed representative.

Technical Specifications

Pressure-flow curve – The mask contains passive venting to
protect against rebreathing. As a result of manufacturing
variations, the vent flow rate may vary.
Pressure (cm H O)
2
3
4
8
10
12
16
20
24
28
30
32
36
40
Deadspace: Empty volume of mask to swivel. The deadspace of
the mask varies according to cushion size.
Therapy pressure (cm H
Resistance: Drop in pressure measured (nominal) (cm H
at 50 L/min
at 100 L/min
Inspiratory and Expiratory Resistance (cm H
Inspiration
Expiration
7
AirFit F10
Flow (L/min)
19
22
32
37
41
48
54
60
66
69
72
77
82
<222 mL (Large)
O)
2
3-40
0.2
0.9
O)
2
0.6
1.0
O)
2