Using The Mask-Fitting Feature - ResMed VPAP Malibu Manual De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

268106r1.book Page 24 Thursday, November 30, 2006 2:35 PM

Using the Mask-Fitting Feature

The VPAP Malibu Mask-Fitting feature can be used to help you fit your mask
properly. The mask-fitting feature delivers air pressure for a three-minute period,
prior to starting treatment, for checking and adjusting your mask fit to minimize
leaks. If a Ramp time (S mode, CPAP mode) or Settling time (VSet mode) is
selected, this allows you to adjust the mask at a pressure closer to the prescribed
pressure. To use the mask-fitting feature:
1
Fit your mask as described in the user instructions.
2
Hold down the Front key for at least three seconds until air pressure delivery
starts.
The following display will appear on the LCD screen indicating that the Mask-
Fitting feature is in operation. The flow generator will ramp to the Mask-Fit
pressure and will remain at this pressure for three minutes. A Mask-Fit star rating
is also displayed. See "Definitions of Mask-Fit Star Rating" on page 25.
Notes:
The Mask-Fit star rating display disappears after three minutes.
Mask-Fit is accessible when the LCD shows the VPAP Malibu screen. It is
also accessible from the Ramp screen or Settling screen (these are only
displayed if a maximum ramp or settling time has been set).
In S and CPAP modes the Mask-Fit pressure is the set treatment pressure or
10 cm H
0, whichever is greater.
2
In VSet mode, the mask-fit pressure is 10 cm H
Mask Alarm and SmartStop functions are disabled while using Mask Fit.
3
Adjust your mask, mask cushion, and headgear until you have a secure and
comfortable fit.
Once you have a secure and comfortable fit, check your Mask-Fit star rating on
the LCD screen. Definitions of the Mask-Fit star ratings are presented in Table 1.
Note: If there is another person nearby to check your Mask-Fit star rating, you
can adjust your mask, mask cushion, and headgear while lying down.
4
After three minutes, treatment will begin.
If you do not wish to wait three minutes, hold down the Front key for at
least three seconds and treatment will begin immediately.
If you press the Front key for less than three seconds, the unit will return
to standby mode (the VPAP Malibu, Ramp or Settling screen is displayed).
24
Mask Fit
*****
excelnt
Mask-Fit Star rating
O.
2
Tabla de contenido

Solución de problemas

loading

Tabla de contenido