Pto; Hydraulic Lift; Steering Brakes And Clutches - GOLDONI C55 Manual De Usuario

4.6 PTO

See Fig.1
Disengage the clutch by pulling up lever n.16.
Engage the PTO by pulling lever n.13 up.
Engage the clutch by releasing lever n. 16 pressing the button on it.
There are two PTOs:
- Top
Spline: modular Di=25.83 De=29.8 Z=11
Turning direction: counter-clockwise
Speed: same Rpm as engine.
- Bottom
Spline: 1"3/8 ASAE with 6 splines
speed: 540 Rpm with engine at 2115 Rpm'
Turning direction: clockwise
Important: When the PTO is not in use, disengage it by lowering lever n.13
fig.1, and keep the clutch engaged by lowering lever n.16 fig.1

4.7 HYDRAULIC LIFT

The lift has lifting and lowering capacity.
When lever n.14 fig.1 is completely lowered, the lift is in its "floating" mode
(cultivator, plough, etc.).

4.8 STEERING BRAKES AND CLUTCHES

The brakes act on the axle shafts and are the band type. The steering clutch is
disengaged by means of lever N° 7 fig. 1. Move the lever to the right to
disengage the clutch of the right-hand crawler-track. Move the lever to the left to
disengage the clutch of the left-hand crawler-track.
After having operated the lever (movement towards the right or left), depress the
brake pedal N° 9 fig. 1 to turn the tractor.
Indicator light N° 12 fig. 12 comes on at the same time as the lever is operated
(right – left).
To prevent the brake bands from overheating, take your foot off the
brake pedal once the braking operation is completed (see fig.13).
49