Glass Cleaning; Fireplace Surface Cleaning - Dimplex DFB4047 El Manual Del Propietario

Maintenance
straight up
4. Slide the light assembly
slightly out of the insert ap-
proximately 1 in..
5. Examine the bulb(s) to de-
termine which bulb(s) require
replacement.
6. Unscrew the bulbs counter
clockwise.
7. Insert new bulbs.
8. Slide the light assembly back
into the insert.
9. Replace the log set into the
insert.
10. Reinstall the log grate.
11. Reinstall the front glass.

Glass Cleaning

The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the clear door may
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
14
(Figure 7). cleaners or spray liquids on the
clear door surface.

Fireplace Surface Cleaning

Use warm water only to clean
painted surfaces. Do not use
abrasive cleaners on glass sur-
face or spray liquids directly onto
any surface.
Unit Storage
Store the unit when not in use in
a dry, dust free location with the
power cord properly secured.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other servicing.
www.dimplex.com