Maintenance; Glass Cleaning - Dimplex VF5452L Manual Del Propietário

Maintenance

WARNING: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.

Glass Cleaning

The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the front glass may
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a dry cloth. The glass should
be completely dried with a lint
free cloth to prevent water spots.
To prevent scratching, do not use
abrasive cleaners or spray liquids
on the glass surface.
Opti-V Surface Cleaning
To remove fingerprints or other
marks, the exterior finish can be
cleaned with a damp cloth with
a mild detergent. The surface
should be completely dried with
a lint free cloth to prevent water
spots.
12
Servicing
Except for installation and
cleaning described in this
manual, an authorized service
representative should perform
any other servicing.
www.dimplex.com