Buttons For Movements - Nice TTPRO BD Instrucciones Y Advertencias Para La Instalación Y El Uso

BUTTON FUNCTION DESCRIPTION
Increase by a single level (bound by the function
+
and displayed by the LEDs).
Decrease by a single level (bound by the function
–
and displayed by the LEDs).
TRANSMITTER
Enables the functions related to the storage of the
DRY
INSERTION transmitters.
CONT.
COUNTER-
Programmes the counter-clockwise rotation of the
CLOCKWISE
DRY
motor.
CONT.
DIRECTION
CLOCKWISE
Programmes the clockwise rotation of the motor.
DRY
DIRECTION
CONT.
Programmes the behavior of the "dry-contact" in
DRY CONTACT
DRY
the motor.
CONT.
Enables the functions related to the storage of limit
POSITION "0"
AUTO
switch "0".
Enables the functions related to the storage of limit
POSITION "1"
AUTO
switch "1".
Enables the functions related to the storage of
POSITION "I"
AUTO
intermediate position "I".
AUTOMATIC
Starts the automatic search procedure of the limit
SEARCH POSI-
AUTO
switches "0" and "1".
TIONS "0" - "1"
SPEED Displays and sets the motor speed.
RDC
TIME OF Displays and sets the duration of the motor's
RDC
MANEUVER maneuver.
SOFT- START / Displays and sets the level of "soft start" and "soft
RDC
SOFT-STOP stop".
TORQUE Displays and sets the level of the obstacle sensitiv-
RDC
REDUCTION ity (or the torque reduction).
Displays and sets the level of intervention of the
WIND LEVEL
ON
"wind protection" function.
SWITCHING ON /
Enables and/or disables the automatic movement
SWITCHING OFF
ON
caused by the SUN and RAIN sensors.
SENSORS
RAIN Displays and sets the direction of movement in
DIRECTION case of intervention of the RAIN sensor.
Displays and sets the level of intervention of the
SUN LEVEL
ON
"sun protection" function.
3 – English
BUTTON FUNCTION
READ
RADIO
PARAMETERS
TEST
WRITE
RADIO
PARAMETERS
TEST
ERASE
RADIO
PARAMETERS
TEST
F1
F1 F2 F3
F2
F1 F2 F3
F3
F1 F2 F3
RADIO TEST
RADIO
TEST
•
Usb
•
Chrg

3.1.1 - BUTTONS FOR MOVEMENTS

A ASCENT: press and release the button
B
MANEUVER STOP: press and release the button
C DESCENT: press and release the button
INTERMEDIATE POSITION (if programmed):
D
press and release the keys
DESCRIPTION
Reads the parameters and/or transmitters of the
connected motor and saves them on the internal
memory of TTPRO BD.
Writes the parameters and/or the transmitters of the
connected motor, reading them from the TTPRO BD
internal memory.
Deletes the selected parameters; if pressed for 3
seconds, restores the factory parameters.
Auxiliary functions 1 button.
Auxiliary functions 2 button.
Auxiliary functions 3 button.
Displays the RF signal/noise level at 433.92 MHz
Displays the link status.
Displays the battery charge status.
+ simultaneously