Inspection And Maintenance - Sperian Miller RA15-1 Manual De Instrucciones Para El Usuario

Install roof anchor.
Connect lifeline snap hook to roof anchor D-ring.
The lifeline snap hook must be connected to the roof anchor D-ring to ensure that the rope grab
is pointed in the correct direction for proper operation. Ensure that the snap hook completely
closes and locks.
CAUTION: Engraved arrow marking on rope grab must point
toward lifeline snap hook for system to operate correctly and
ensure user safety. (See Figure 8. )
Attach lifeline
snap hook to
roof anchor
D-ring.
Connect lanyard shock absorber pack snap hook to harness back D-ring.
Ensure that snap hook completely closes and locks.

6.0 Inspection and Maintenance

6.1 Inspection
the user before each use and inspected by a Competent Person on a regular basis.
Roof Anchor
damaged parts; rough or sharp edges; loose fasteners or missing parts/components; corrosion;
indications of damage/problems that may affect the integrity and operation of the product. If in
doubt, contact the manufacturer.
Harness
the entire length of the webbing, inspecting both sides of each
strap. Watch for frayed edges, broken fibers, pulled stitches, cuts,
burns, and chemical damage.
Us er In stru ctio ns - Engli sh
Fig. 8
Grasp the webbing with your hands 6 inches