Cleaning And Storage - Sperian Miller RA15-1 Manual De Instrucciones Para El Usuario

Pack-Type Shock Absorber: The outer portion of the pack
should be examined for burn holes and tears. Stitching on areas
where the pack is sewn to the lanyard or hardware should be
examined for loose strands, rips, deterioration or other signs of
activation.
Carabiner
distorted, worn, malfunctioning or damaged parts; rough or sharp edges; loose fasteners or
missing parts/components; corrosion; deterioration; signs that indicate the product has been
integrity and operation of the product. If in doubt, contact the manufacturer.
Check the carabiner to be sure that it operates freely and only as intended by the manufacturer.
or have been subjected to fall arresting forces

6.2 Cleaning and Storage

after use are as important as cleansing the equipment of dirt, corrosives, or contaminants. Stor-
age areas should be clean, dry and free of exposure to fumes or corrosive elements.
Clean equipment periodically with a sponge dampened in a mild solution of water and commer-
cial soap or detergent to remove any dirt, paint, or other materials that may have accumulated.
Wipe dry with a clean cloth and/or hang freely to dry away from excessive heat, steam, or long
periods of sunlight. Store in a clean, dry area when not in use.
6.3 Servicing
Us er In stru ctio ns - Engli sh
Devices that do not pass inspection
must be removed from service.
20