Sperian Miller RA15-1 Manual De Instrucciones Para El Usuario página 10

4.4 RA35-1 Temporary Roof Anchor
Warnings and Limitations
ted by the system while in use (or provide a 2:1 safety factor).
sheathed roofs comprised of wood members. Do not install on unsupported roof struc-
tures such as eaves or gable overhangs. Do not install on facia boards.
63.5mm) or longer lag screws be used each time the anchor is installed. Roof anchor
must be inspected before each installation.
Fig. 4a
Sheathing
Attach with
six (6) 16d
nails.
Installation
under roof sheathing at the location where the roof anchor will be installed.
WARNING: Use all six (6) 16d nails OR all three (3) ¼" x 2-½" (6.4mm x 63.5mm) lag
screws to attach the RA35-1 roof anchor. All nails/screws must pass through the sheath-
ing and into a support structure. If this warning is not followed, the anchorage connec-
tion will be weakened and serious injury or death could occur in the event of a fall.
WARNING: Attach to the O-ring only with a locking snap hook, locking carabiner, or other
Miller approved connector or connecting device.
Us er In stru ctio ns - Engli sh
Roof Anchor
Roof
Member
Sheathing
Attach with three
(3) ¼" x 2-½"
(6.4mm x
63.5mm) lag
screws.
Fig. 4b
10
Roof Anchor
Roof
Member
-