Sperian Miller RA15-1 Manual De Instrucciones Para El Usuario página 19

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

D-Rings/Pads: Check D-rings for distortion, cracks, breaks, and
rough or sharp edges. The D-ring should pivot freely. Inspect for
D-ring attachments.
excessive wear, or other signs of damage.
Buckles: Check all buckles for distortion, cracks, breaks, and
rough or sharp edges. Inspect for any unusual wear, frayed or cut
buckles properly engage.
tion. They should overlap the buckle frame and move freely back and forth in their socket.
Roller should turn freely on frame. Inspect for loose, distorted or broken grommets. Webbing
should not have additional punched holes.
Friction and Mating Buckles: Inspect the buckle for distortion. The outer bars and center
arrest or any other indications of damage/problems that may affect the integrity and operation of
the product. If in doubt, contact the manufacturer.
Rope Grab
damaged parts; rough or sharp edges; loose fasteners or missing parts/components; corrosion;
indications of damage/problems that may affect the integrity and operation of the product. If in
doubt, contact the manufacturer.
Lanyard/Vertical Lifeline
When inspecting lanyards and vertical lifelines, begin at one
end and work to the opposite end. Slowly rotate the lanyard or
lifeline so that the entire circumference is checked.
mandrel, observe each side of the web lanyard. This will reveal
any cuts, snags, or breaks. Swelling, discoloration, cracks,
and/or charring are obvious signs of chemical or heat damage.
Rope: Rotation of the rope lifeline while inspecting from end-
Weakened areas from extreme loads will appear as a noticeable
change in original diameter. The rope diameter should be
uniform throughout, following a short break-in period.
distortions, cracks, breaks, corrosion, pitted surfaces, and rough
without binding and should not be distorted or obstructed. The
the eye of the splice, and the splice should have no loose or cut
strands. The edges of the thimble must be free of sharp edges,
distortion, or cracks.
Us er In stru ctio ns - Engli sh
While bending webbing over a pipe or
Inspect closely for hook and eye
-
Tabla de contenido
loading

Este manual también es adecuado para:

Miller ra20-1Miller ra30-1Miller ra35-1

Tabla de contenido