NUK Eco Control Video Display 550VD Manual Del Usuario página 70

Playing individual lullabies
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or
select the Lullabies menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the sub-
menu.
Timer: Allows you to set a time limit for
playing the lullabies.
Shuffle/Loop: You can choose to have
all the lullabies played one after the other
(loop) or in a random sequence (shuffle).
Lullaby: You can choose one of four
specially composed lullabies or soothing
natural sounds.
OFF: The lullabies will be deactivated.
4. Use the 25 or
star in front of the musical note symbol.
At this point, you can still exit the sub-
menu by pressing the
submenu will close and you will be
returned to the previous submenu. How-
ever, to continue with your settings, con-
tinue with the next step.
5. Press the button 26 to view the next
submenu.
6. Use the 25 or
star in front of the required lullaby.
7. Press the button 26 to confirm your
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
While a lullaby is playing, the corre-
sponding symbol will be shown in the
status bar.
If you have also activated the timer, the
corresponding symbol in the status bar
will also show a "T".
27 button to
28 button to move the
button 27. The
28 button to move the
Notes:
• If the timer function for the lullabies has
not been activated, the activated lullaby
will play endlessly until switched off
manually on the baby or parent unit (see
"5.4 Playing the lullabies" on page 54).
• After 15 seconds without any input from
you, the menu will be closed with the
settings unchanged and the parent unit
will return directly to monitoring mode.
Switching the lullabies off
You can switch the lullabies off at any time,
using the main menu of the parent unit or
directly on the baby unit.
1. Press the
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the
select the Lullabies menu.
The selected symbol will be shown in red.
3. Press the
menu.
Timer: Allows you to set a time limit for
playing the lullabies.
Shuffle/Loop: You can choose to have
all the lullabies played one after the other
(loop) or in a random sequence (shuffle).
Lullaby: You can choose one of four
specially composed lullabies or soothing
natural sounds.
OFF: The lullabies will be deactivated.
4. Use the 25 or
star in front of "OFF".
5. Press the
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
The lullabies will be switched off.
The corresponding symbol in the status
bar disappears.
68
button 26.
24 or 27 button to
button 26 to view the sub-
28 button to move the
button 26 to confirm your