Resetting Cutting Angle; Care And Maintenance; Emptying The Dust Container - Hilti WSJ 750 Manual Del Usuario

8.2

Resetting cutting angle

1. Slacken the screw.
2. Set the cutting angle to 0°.
3. Push the base plate back to its original position.
4. Securely tighten the screw.
8.3 Removing dust extractor
1. Pull the vacuum cleaner hose off the suction adapter.
2. Press the dust removal adapter down and pull it out of the product.
8.4 Ejecting the saw blade
WARNING
Risk of injury. Uncontrolled ejection of the saw blade can lead to injury.
▶ When ejecting the saw blade, hold the product in such a way that it presents no risk of injury to persons
or animals.
▶ Push the saw blade ejection lever to the side as far as it will go.
▶ The saw blade will be released and ejected.
9

Care and maintenance

WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries including
burns.
▶ Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Store or online at: www.hilti.group.
9.1

Emptying the dust container

WARNING
Dust hazard Tapping the dust removal module to empty it releases dust.
▶ Wear light respiratory protection.
1. Simultaneously press the left and right buttons on the dust container.
*377834*
14
15
377834 English 23