Tabla de contenido
Idiomas disponibles
Idiomas disponibles
16
18
17
Selection table for optical device insert rings
Correspondence of the inner diameter of the insert ring and the outer diameter of the
lens casing of the daylight optical device
Cover-adapter
model
Internal diameter of insert, mm
47
Cover adapter
48
FN 42mm
49
50
55
56
Cover adapter
57
FN 50mm
58
59
60
61
62
Cover adapter
FN 56 mm
63
64
65
23
2
Open
Close
20
19
21
22
Outer diameter of lens casing of the daylight
optical device, mm
46.7-47.6
47.7-48.6
48.7-49.6
49.7-50.6
54.7-55.6
55.7-56.6
56.7-57.6
57.7-58.6
58.7-59.6
59.7-60.6
60.7-61.6
61.7-62.6
62.7-63.6
63.7-64.6
64.7-65.6
Mounting a monocular on the digital module
The Pulsar 5x30 monocular (included in the
package) enables you to transform a digital
module into a digital vision device for night
observation with a magnification of 5x. Insert the
monocular tightly into the digital module as far
as it will go so that the pins on the monocular
body (E) fit into the slots (D) of the digital module
(see Fig.). Turn the monocular anticlockwise so that the
monocular is fixed onto the digital module. The triangular
mark on the digital module and the square on the monocular
body must be aligned. To remove the monocular, turn it clockwise
and gently pull it towards you.
Powering on and image setup
•
Remove the lens cover (1) by turning it anticlockwise.
•
Turn on the device with a short press of the ON button (9). An image will appear on the display.
•
Adjust the resolution of the icons on the display by rotating the dioptre adjustment ring on the sight of your
optical device. In future, it will not be necessary to rotate the eyepiece dioptre adjustment ring, regardless of
distance and other conditions.
•
Rotate the lens focus ring (10) to focus on the object being observed.
Basic settings (brightness and contrast adjustment) can be altered by using the quick access menu.
Power the device off after use with a long press of the ON button (9).
Quick Access Menu Functions
•
Enter the 'quick' menu with a short press of the M button (7).
•
A short press of the M button (7) enables you to switch between functions, as described below.
•
– by pressing the RIGHT (6) and LEFT (8) buttons and changing the display
Brightness
brightness value from 0 to 20.
•
– by pressing the RIGHT (6) and LEFT (8) buttons and changing the display contrast
Contrast
value from 0 to 20.
Main Menu Functions
•
Enter the main menu with a long press of the controller button (7).
•
Press the RIGHT (6) and LEFT (8) buttons to toggle through the main
menu functions.
•
Open sub-items in the main menu with one short press of button M (7).
•
To exit a sub-item in the main menu, press and hold down on button M (7).
•
Automatic exit from the main menu occurs after 10 seconds of
inactivity.
Structure and description of the menu
•
Brightness of icons
•
Wi-Fi Settings
•
General Settings
•
Automatic power-off
•
Device Information
General view of the menu:
6
Tabla de contenido
Solución de problemas
