Prooving Cabinets; Description And Use Of The Manual Control Panel; Humidity Control - Unox XF Serie Manual De Instrucciones

ENGLISH
5.3 EXAMPLE OF THE ELECTRONIC CONTROL SET UP
Follow the example on the chart.
95
humidity
humidity
acqua
TIME IN MINUTES - TEMPO IN MINUTI
The total baking time is the sum of the 4 programmed
basic periods , in the example it is 37 minutes.
1. Set up of the first basic time:
TIME
BAKING CHAMBER TEMPERATURE : 150°C
HEART PROBE TEMPERATURE
STEAM QUANTITY
HUMIDITY EXTRACTION
STOP FANS
Press the MEM button near the time knob to save the
first baking basic time and begin to set up the 2nd.
2. Set up of the second basic time:
TIME
BAKING CHAMBER TEMPERATURE : 180°C
HEART PROBE TEMPERATURE
STEAM QUANTITY
HUMIDITY EXTRACTION
STOP FANS
Press the MEM button near the time knob to save the
second baking basic time and begin to set up the 3rd.
... continue the set up of the 3rd and 4th basic times
in the same way for a total baking time of 37 minutes.
Rotate the PROG knob to save the total baking pro-
gram, assigne a memory number between 21 and 70,
press the button MEM PROG near the programs knob
until the buzzer sounds: the program is saved.
In case it is choosen to save a protected program,
assigne to the program a number between 1 and 20
and press the buttons MEM PROG and 1/2 together
until the buzzer sounds.
PAGE 09 / GB
acqua
humidity
humidity
acqua
acqua
: 2 minuti
: ---
: 95%
: ---
: 01
: 5 minuti
: ---
: 80%
: ---
: 01
5.4 USE OF SAVED BAKING PROGRAMS
Swith on the oven with the button ON/OFF, rotate the
PROG knob until the number assigned to the program
appears on the display, press the button MEM PROG
to start the baking program.
In case it is necessary to stop the baking program for
a pause, press the button START/STOP.
To continue the baking program from the point it
stopped, press again START/STOP.
6.

PROOVING CABINETS

6.1 DESCRIPTION AND USE OF THE CONTROL PANEL
»
TEMPERATURE CONTROL
Thermostat Knob
It regulates the temperature
from 0°C and 40°C.
Rotate the thermostat knob
clockwise and set the rising
temperature (max 40°).
Temperature Pilot Light
- ON : appliance is heating
- OFF : temperature is reached
»

HUMIDITY CONTROL

Humidity Push-Button (grey)
It injectes water on the pans placed on the
bottom of the prooving cabinet, by manual
pulses.
Check that the water level inside the
pans never be over the maximum charge indicated by
- MAX.
PROOVING CABINET IGNITION
Ignition Push-button (grey)
ON /OFF push-button to switch on and
switch off the appliance.
II. INSTRUCTIONS FOR THE USER