Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KM 8212
Pen type multimeter
Diode test
1. Use the probe cover if making
measurements on category III or
above installations.
2. Insert the black test lead into the
COM jack.
3. Turn the rotary switch to the
position.
Note:
• The display shows the approx.
forward voltage drop.
Continuity
1. Use the probe cover if making
measurements on category III or
above installations.
2. Insert the black test lead into the
COM jack.
3. Turn the rotary switch to the
position.
Instructions manual |
32
4. The default mode is resistance.
Press FUNC to switch to diode test.
5. Connect the test probe to the
anode (+) and test lead to the
cathode (-) of the diode.
6. The display will show the measured
value.
• lf the connections are reversed or
the leads are not connected, the
display will show "OL".
4. The default mode is resistance.
Press FUNC twice to switch to
continuity.
5. Connect the test probe and
test lead across the circuit for
measurement.
6. lf the measured resistance is less
than 50Ω, the buzzer will sound.
www.grupotemper.com
Capítulos
Tabla de contenido
