Diode Test - koban KMD-13 Instrucciones Operativas

jack (COM) and the red test lead banana plug into the
positive (+) jack ( ).
3. Press the
the display.
4. Touch the test probe tips to the circuit or wire you wish to
check.
If the resistance is less than approximately 30 , the audible
signal
5. will sound. The display will also show the actual
resistance.

DIODE TEST

WARNING: To avoid electric shock, do not test any diode
that has voltage on it.
1. Set the function switch to
2. Press the
the display.
3. Insert the black test lead banana plug into the negative (-)
jack (COM) and the red test lead banana plug into the
positive (+) jack ( ).
4. Touch the test probe tips to the diode or semiconductor
junction you wish to test. Note the meter reading
www.grupotemper.com
AUTORANGING MULTIMETER

button until the
button until the

KMD-13
symbol appears in

position.
symbol appears in
23