Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KM 8212
Pen type multimeter
AC Current
Range
Resolution
20mA
200mA
Overload Protection: Resettable fuse
Frequency Range: 4Hz-200Hz
Response: Average (rms of sine wave).
Logic test
Function
Logic
Input impedance: 10MΩ
Overload protection: 250VDC or 250VAC rms.
Using the meter
Reading Hold
During measurement, press HOLD
button to keep the current reading
on the display. D.H will appear on
the display. Press HOLD again to
return to norma display.
Max Hold
During measurement, press the MAX
button and the disply will show the
maximum value recorded. M.H will
appear on the display. Press MAX
again to return to normal display.
Instructions manual |
28
0.01mA
0.1mA
Description
Function button
In voltage/current modes, press the
FUNC button to switch between
AC/DC. At the resistance/diode/
continuity position, press FUNC to
switch between these modes.
Manual range
In voltage/current/resistance modes,
the default range is AUTO. Press the
RAN button to switch to manual
range. Each press of the button
increases the range, and returns to
the lowest range once pressed in the
highest range. Hold down RAN to
return to auto-range.
Accuracy
±2.0% of rdg ± 3 digits
www.grupotemper.com
Capítulos
Tabla de contenido
