Diode Test - koban KMDS01 Instrucciones Operativas

(COM) and the red test lead banana plug into the positive (+)
jack
3. Press the MODE button until the
the display.
4. Touch the test probe tips to the circuit or wire you wish to
check.
5. If the resistance is less than approximately 30 , the audible
signal will sound. The display will also show the actual
resistance.

DIODE TEST

WARNING: To avoid electric shock, do not test any diode
that has voltage on it.
1. Set the function switch to
2. Press the MODE button until the
display.
3. Insert the black test lead banana plug into the negative (-) jack
(COM) and the red test lead banana plug into the positive (+)
jack.
4. Touch the test probe tips to the diode or semiconductor
junction you wish to test. Note the meter reading
www.grupotemper.com
AUTORANGING MULTIMETER
position.
symbol appears in the
KMDS01
symbol appears in

15