Starting The Device; Connecting The Parent Unit - NUK Babyphone Eco Control Audio 530D Manual Del Usuario

Light
Display 15
Note: Always connect the cables before
inserting the mains adapter into the socket.
4.1 Connecting the parent
unit
The parent unit is powered by the supplied
rechargeable LiPo battery. This can be
charged using the supplied mains adapter.
Caution! To prevent malfunctions, first
insert the battery into the parent unit and
then connect the mains adapter to the
parent unit.
Parent unit
Display
flashes rapidly
flashes slowly
flashes
flashes and bars run
across the display
lights up
flashes

4. Starting the device

30
Lullabies on/off button 21 was held
down. The next song is played.
Eco-Mode has been activated. Your
baby is very probably asleep. That is
why the lullaby function has been
deactivated.
Shows the battery's charge state. The
more bars you can see the higher the
charge in the battery.
Battery power is extremely low. The
device will shortly switch itself off.
The parent unit is connected to mains
power and the battery is being
recharged.
Nightlight has been activated
Eco-Mode has been activated. Your
baby is very probably asleep. That is
why the nightlight function has been
deactivated.
Shows the selected volume level. The
more bars you can see the higher the
selected volume
Loudspeaker symbol with no bars: The
device is muted.
1. Remove the battery cover 12 on the back
of the parent unit 11, by sliding it
downwards.
2. Put the battery in its compartment as
indicated on the unit. Make sure you
insert it with the correct polarity (+ and -).
3. Slide the battery cover 12 back onto the
parent unit 11.
4. Insert the small plug of the mains adapter
into the mains adapter socket 24 of the
parent unit.
5. Insert the plug into a power socket that
matches the rating given in the technical
Meaning