SHERCO SE 4.5i-f Manual De Propietario página 69

CHECKING THE BRAKES LEVELS
Checking the front and rear brake
fluid level
- With the brake reservoir in a horizontal
position, the brake fluid should be able to
be seen in the observation window
- The fluid should be between the two
arrows as shown in the diagram below.
It should be nearest to the upper arrow.
Topping up the front
and rear brake fluid
WARNING
- Hydraulic fluid is highly corrosive, it can
be harmful to the skin.
- Please read the recommendations on
the container carefully.
- Loosen the two screws
- Remove the cap and its diaphragm.
- Fill the reservoir with DOT4 brake fluid
- Replace the diaphragm, the cap and
the two screws
67