Extended Modes - Quick Guide - Petsafe Microchip Petporte smart flap Guia Del Usuario

Extended Modes - Quick Guide

Please see page 16 for a full explanation of each Extended Mode.
Press and hold both the Red and Green Buttons simultaneously for more than 2 seconds and then release to enter the Extended Mode menu.
When in Extended Modes, the green light illuminates and you start in Exit Mode. Modes are selected by pressing the Red Button to go
"up" a mode and the Green Button to go "down" a mode. The current mode is indicated by a number of beeps. When you are in the
mode you require a quick press of both buttons simultaneously will activate that mode.
No. of Beeps Mode
1 Exit Mode
Open Mode
2
Silent Mode
3
Set Light Level Mode
4
Lock Return Time
5
6 Low Battery Lock State
Timer Mode
7
14
Function
Cancels the extended mode option system and returns the Petporte smart
fl ap ® to a normal mode of operation.
The green light will fl ash and the green lock will lower allowing any cat
access through the Petporte smart fl ap
The audible beep will no longer sound when your cat is recognised by the
Petporte smart fl ap ® .
Sets the desired light level for which the cat fl ap will lock and unlock during
Night Mode operation.
The default time for your Petporte smart fl ap
locked positions after your cat's microchip has been recognised is 4
seconds. However, should you have a particularly timid cat, or if your cat is
frequently chased by other cats, the lock return time can be lengthened or
shortened.
If, when the Petporte smart fl ap
charge runs low, the Petporte smart fl ap
locks to be set at a specifi ed open or closed position.
Sets the specifi c times of day for which the cat fl ap will lock and unlock
during Night Mode operation.
® .
® 's locks to return to their
®
is running in battery mode, the battery
® has a built in option to allow the