Nice TT6 Instrucciones Y Advertencias Para La Instalación Y El Uso página 13

5.5.11 – Delete all memorised transmitters
command
Deletes all the transmitters from the motor.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
5.5.12 – Delete motor parameters command
Deletes all the limit switch data from the motor.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Command Data CR
[AA]
65 – –
Command Data CR
[AA]
65 – –
Command Data CR
[AA]
65 – –
Command Data CR
[AA]
66 – –
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
5.6 – Commands for memorising and viewing
lists
Two commands lists (max. 30 commands) can be stored.
The commands are then executed sequentially in the event
of a transition of the 12 V input trigger, or when the up or
down trigger event is set from the transmitter.
The serial port command to store commands that will be
executed when the signal moves from low to high is::
MEM_ON [XX] [YY] [XX1] [YY1] [...] [...] [Carriage Return]
Note – The fields are one space apart and the string ends
with Carriage Return.
Important! - Address 1 is used for sending commands
to the mechanical motor.
The fields are:
MEM_ON It is the string that stores the commands in the
first list.
Command Data CR
[AA]
66 – –
Command Data CR
[AA]
66 – –
English - 11