General Information; Reminders About To Expire - Puritan Bennett Sandman Duo Manual De Utilización

General Information

To view the compliance data that has been recorded, press the left control button
access this menu.
The data display is identical on the Sandman Duo™ and the Sandman DuoST™.
Note: The symbol indicates that the values displayed on the page cannot be modified.
Views of the display
Press the right control button
The pages for the last 5 sessions can be displayed, from the most current to the oldest.
Press the right control button
Press the on/off button to exit the menu.

Reminders about to expire

This feature is the same on the Sandman Duo™ and the Sandman DuoST™.
When one or several reminders are about to expire, the information access symbol in the
lower left of the screen changes to the blinking envelope symbol
whether the device is in standby mode (i.e., when the time is displayed) or in operating
mode (i.e., when the pressure is displayed).
Pressing the button located opposite the symbol brings up a window with a list of the
reminders involved, as the following example shows.
Views of the display
Once the settings are made, select the page header by using the ramp button or the
on/off button, then press the on/off button to exit the menu.
Sandman Duo/DuoST Patient Manual
Hour counter: Device operating time.
Total use: Duration of use counter. Total time during which the patient
actually breathed in the mask
Tot. Session Nbr.: Number of start/stop sessions in the device
memory.
to access the next page relating to the last session.
Usage duration: Length of time during which the patient was actually
breathing in the mask.
Average Freq: Average frequency measured during the session.
Average leak: Indicates the average leak, displaying OK, +, ++, +++,
or ++++.
The session date and time are displayed in the upper right of the screen.
to access the next session.
The first parameter is accessible by pressing the ramp button. The
symbols displayed in the lower part of the screen change as shown on the
screen.
The example asks whether or not the filter has been changed. Press the
right control button
respond no. If you respond yes, the event reminder disappears from the
display.
.
to respond yes and the left button
to
. This appears
to
US – 29