Gewiss Chorus EIB GW 10 791 Manual Del Usuario página 53

The following parameters are only significant if the timer-thermostat has been configured
via ETS to function as the master device. In all other cases they will be ignored.
USER INSTRUCTIONS
P09 - Setting the 2 point regulation differential value
When the
regulation value using the
Press the key within 30 seconds to confirm the value
set.
The regulation differential is the deviance between the
set-point setting and the actual activation temperature. It
is possible to set different regulation differentials for the
heating and air-conditioning functions. It is recommended
to retain the preset values except in special situations.
P10 - Enabling self-learning (heating only)
When the
keys to enable (ON) or disable (OFF) the function.
Press the key within 30 seconds to confirm the value
set.
The self-learning function optimises the activation of the
heating in advance (max 2 hours).
The timer-thermostat manages the advance automatically,
so as to guarantee the set temperature at the beginning of
every period of the programmed profile.
This function is activated in heating, in automatic
operation mode only.
P11 - Enabling/Disabling of the master function
When the P11 code appears on the screen, it is possible
to momentarily deactivate the master function mode and
activate the stand alone function mode (01 = master
function mode, 00 = stand alone function mode).
Press the key within 30 seconds to confirm the value
set. If the master function mode has been selected, move
on to point P12, otherwise the procedure has now been
completed.
53
symbol appears, set the differential
keys.
symbol appears on the screen, use the
E
N
G
L
I
S
H