Gewiss Chorus EIB GW 10 791 Manual Del Usuario página 40

The device is configured by the ETS software to achieve one of the functions listed below.
Temperature control
• with 2 points, ON/OFF commands or constant regulation (0% 100%)
• proportional control, with PMW commands or constant regulation (0%÷100%)
Setting the operation mode
• from the bus with separate 1 bit objects (OFF, ECONOMY, PRECOMFORT, COMFORT,
AUTO)
• from the bus with 1 byte objects
Temperature reading
• with integrated sensor or temperature probe
• mixed with definition of the relative weight
Temperature control in zones
• with transmission of the operation mode to the slave thermostats
• with transmission of the set point to the slave thermostats
Scenes
• memorising and activating the 8 scenes (value 0.63)
Other functions:
• setting of the (OFF, ECONOMY, PRECOMFORT, COMFORT) set point by the bus
• setting the function type (heating/air conditioning) by the bus;
• setting of the time and day by the bus
• transmission of the time and day from the bus to the slave thermostats
• transmission to the bus of the status information (mode, type) and the temperature
reading
• management of status information sent from the controlled actuator
The device is installed on the wall using the supplied flange that can be fixed to the wall
using dowels or screwed onto a 3 module flush-mounted box.
GENERAL DESCRIPTION
40