Installing P-Touch Editor - Brother P-touch 2400 Manual Del Usuario

Installing the P-touch Editor software and printer driver add even more illustration and layout
features to the label-making possibilities available with your PT-2400/2410.
To install P-touch Editor and the printer driver on an IBM PC-compatible computer:
1 Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Microsoft Windows
Hard disk free space: At least 20 MB
A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.
Monitor: VGA or higher graphics card
Serial port: 9-pin connector jack
CD-ROM drive
2 Connect the PT-2400/2410 to the computer's serial port and turn on both the PT-
2400/2410 and the computer.
3 Insert the P-touch Editor CD-ROM into the
computer's CD-ROM drive.
The installers for the P-touch Editor
program, printer driver and User's
Guide can also be copied from the CD-
ROM onto floppy disks. Refer to the
Readme file for more details.
4 Click the Editor button to install the P-touch
Editor software and the PT-2400/2410 printer
driver.
To install only the printer driver, click
the Printer driver button, select the
desired model, and then skip to step
B .
5 Click the PT-2400/2410 button to start up the
®
InstallShield Wizard for installing the P-touch
Editor software and the PT-2400/2410 printer
driver.
6 In the Welcome dialog box, click the Next
button.
8

INSTALLING P-TOUCH EDITOR

®
95, 98 or NT 4.0