Barcode Function - Brother P-touch 2400 Manual Del Usuario

The Barcode function, which enables barcodes to be printed as part of labels, is one of this
machine's most advanced features.
This section will explain how to enter a barcode into your text. It is not intended as a
comprehensive introduction to the concept of barcoding. For more detailed information,
please consult one of the many reference books available.
Since this machine is not specifically designed for special barcode label-making, some
barcode readers may not be able to read the labels.
Print barcodes with black ink on a white background.
Four different parameters enable you to create custom barcodes.
PARAMETER
PROTOCOL
WIDTH (barcode width)
UNDER#S (characters printed below barcode)
CHECK DIG. (check digit)
The default settings are CODE 39 PROTOCOL, LARGE WIDTH, UNDER#S set to ON, and
CHECK DIG. set to OFF.
It is recommended that barcodes be printed with the Tape margin function set to FULL
and the barcode WIDTH parameter set to LARGE; otherwise, the barcodes may be diffi-
cult to read.
To use the Barcode function:
1 Hold down
To change the data or parameters of a barcode that has already been created, posi-
tion the cursor below the right half of the barcode mark (
and pressing
Code Code
A block can only contain one barcode. If a barcode has already been entered in the
block when
CODE PER BLOCK!" appears.
To quit the Barcode function without making any changes, hold down
Barcode
press
I I
2 Type in the new barcode data or edit the old data.

BARCODE FUNCTION

Barcode
and press
I I
Code Code
í í
Barcode
.
I I
í í
is held down and
Code Code
.
í í
SETTINGS
CODE
UPC-A, UPC-E, EAN128
LARGE, SMALL
ON, OFF
OFF, ON
once.
Barcode
is pressed, the error message "1 BAR-
I I
í í
39, I-2/5, EAN13,
) before holding down
EAN8,
and
Code Code
97