Length Function - Brother P-touch 2400 Manual Del Usuario

Although the length of the printed label automatically adjusts to fit the length of the entered
text, there may be times when you will want to make a label with a specific length. The Length
function allows you to set the label length between 1.6 and 11.8 inches (4.0 and 30.0 centime-
ters).
The default length setting is OFF. When the Length function is set to ON, the Length indicator
on the right side of the display lights up.
Turning off the machine and turning it on again changes the length setting back to OFF.
To turn on or off the Length function:
1 While holding down
current length of the label (the text and both margins) briefly, and then display the current
label length setting (ON or OFF).
2 While still holding down
ting is displayed.
The Length indicator lights up when ON is selected.
3 Release
Code Code
4 Press or
Home
length.
To change the length in 1" (1.0-cm) steps, hold down either
then release the key when the desired setting is displayed.
The default setting (4" (10.0 cm)) can be selected by pressing
To switch the unit of measurement between inches and centimeters, press
until the measurement is displayed in the desired unit.
New Block
5 Press .

LENGTH FUNCTION

, press
Code Code
, continue pressing
Code Code
. If ON was selected, the current label length setting is displayed.
to select the desired length or use the number keys to enter the
End
Length Length
once, and keep
T T
Length Length
T T
held down to display the
Code Code
until the desired label length set-
Home
Feed&Cut
.
Space Space
or , and
End
M M
ñ ñ
95