Memory Functions - Brother P-touch 2400 Manual Del Usuario

You can use the memory to store your most frequently used text files. The text remains in the
memory, even after all characters are removed from the display using the Clear function (see
page 59).
When each file is stored, it is given a number to make recalling it easier. Up to 100 text files or
about 2500 characters can be stored in the memory.
Since a copy of the stored text file is recalled when the Recall function is used, the text can be
edited or printed without changing the originally stored file. When a file is no longer needed or
more space is necessary, the Memory delete function can be used to delete it.
When inserting new batteries, be sure to insert the new ones within five minutes of
removing the old ones, otherwise any text files stored in the memory will be lost (unless
the machine is plugged into an electrical outlet with the AC adaptor).
STORING TEXT
To store a text file:
1 Hold down
If 2500 characters have already been stored, the error message "MEMORY FULL!"
appears in the display. If this occurs, an existing text file must be deleted before the
new one can be stored.
To quit the Store function without storing the text, hold down
Store Store
(or press just
& &
7 7
2 Press or
Home
New Block
3 Press . The text is stored under the selected file number and the text previously
shown in the display re-appears.
If a file is already stored under the selected file number, the message "OVER-
WRITE?" appears in the display and you must decide whether or not to overwrite it
(delete it from the memory and store the new one).
To overwrite the stored file with the new one:
New Block
4 Press to delete the previously stored file and store the new one under the selected
number.
To go back and choose another file number without overwriting the text file, press
Clear Clear
, and then select a different file number.
Del Del
108

MEMORY FUNCTIONS

Store Store
and press
& &
Code Code
7 7
Clear Clear
).
Del Del
until the file number where you wish to store the text is displayed.
End
. "STORE" appears in the display.
and press
Code Code