Ethernet Communications; Rs-485 Communications - Circutor AFQm IP54 Serie Manual De Instrucciones

7.11.- ETHERNET COMMUNICATIONS

The Ethernet communication parameters are configured in this screen,
By activating the DHCP option ☑ DHCP, the device assigns the IP automatically.
If this option is not activated, the parameters must be configured manually:
● IP Address, IP address.
● Netmask, subnet mask.
● Gateway, gateway.
Press the

7.12.- RS-485 COMMUNICATIONS

The RS-485 communications configuration in AFQm IP54 models is set to a Baud rate of 9600 bps, 8
data bits, 1 stop bit and no parity. Only the device's Modbus address can be configured,
● Modbus device, modbus address.
Press the
150
Figure 65: Configuration screen: Ethernet communications.
key to save the modified settings.
Figure 66: Configuration screen: RS-485 communications.
key to save the modified settings.
AFQm IP54
:
Figure 65
Figure 66
Instruction Manual
.