Numeric Values Screens; Thd; Tdd - Circutor AFQm IP54 Serie Manual De Instrucciones

AFQm IP54

6.2.- NUMERIC VALUES SCREENS

To access the numeric value screens, click on
Note: Swipe right or left to scroll through the different screens.
Note: These screens are not visible on "slave" devices.

6.2.1.- THD

This screen shows:
 The voltage THD in each of the phases, L1, L2 and L3.
 The current THD in the Mains in each of the phases, L1, L2 and L3.
 The current THD in the Load in each of the phases, L1, L2 and L3.

6.2.2.- TDD

Note: This screen is only visible if the Line Current I
screen, see
"7.8.- IEEE519"
shows the TDD, which is the ratio of the harmonic current to the nominal current in the line.
Figure 31
Instruction Manual
Figure 30: THD display.
.
Figure 31: TDD.
.
(A) has been set up on the IEEE519 configuration
L
125