Safety Information; During Use - koban KP 2102 Manual Del Usuario

Pinza amperimétrica digital
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Safety Information

WARNING
BE EXTREMELY CAREFUL WHEN
USING THIS METER. Improper use
of this device can result in electric
shock or destruction of the meter.
Take all normal safety precautions
and follow the safeguards
suggested in this manual. To
exploit full functionality of the
meter and ensure safe operation,
please read carefully and follow the
directions in this manual.
This meter has been designed
according to IEC-1010 concerning
electronic measuring instruments
with an overvoltage category CAT
600V and pollution 2.
Follow all safety and operating
instructions to ensure safe use of the
meter.
With proper use and care, this digital
multimeter will give you years of
satisfactory service.
Preliminary
When using the meter, the user
must observe all normal safety rules
concerning:
General protection against
electric shock
Protection of the meter against
misuse.
www.grupotemper.com
Digital clamp meter
When the meter is delivered, check
whether it has been damaged in
transit.
After being stored and delivered
under harsh conditions, the meter
should be checked and confirmed
whether any damages have been
incurred.
Test leads must be kept in good
condition. Before using check
whether the insulation on test leads
has been damaged and any wire has
been exposed.
Use the test leads supplied to ensure
operation safety. If required, they
must be replaced with test leads of
the same model or class.

During Use

Use the right input jack, function and
range.
Do not take measurements that
exceed the protection limit values
indicated in the specifications.
Do not touch the metal tips of
the test leads when the meter
is connected to the circuit to be
measured.
Keep your fingers behind the probe
barriers when taking a measurement
with an effective voltage above 60V
DC or 30V rms AC.
Do not take voltage measurement if
the value between the terminals and
earth ground exceeds 600V.
Select the highest range if the value
scale to be measured in the manual
Instructions manual |
KP 2102
25

Hide quick links:

Capítulos

Tabla de contenido
loading

Tabla de contenido