Safety Information - koban KPA 02 Manual Del Usuario

KPA 02
Digital clamp meter

Safety information

Warning
Please particularly note that inappropriate use may cause shock or damage
to the meter. When using, comply with common safety procedures and
completely follow the safety measures stated in the operation manual.
In order to make full use of the meter's functions and ensure safety
operation, please carefully read and follow the use methods in the
operation manual.
The meter meets EN61010-1, EN61010-2-032 safety requirements for
electrical testing instruments and handheld digital multimeters. It's
designed to comply with a CAT III 1000V safety rating and pollution degree
of 2.
Please follow the safety operation guidelines to ensure the safe use
The meter will provide satisfactory service to you if you use and protect it
appropriately.
Preparation
• When using the meter, the user should comply with standard safety rules:
- General shock protection
- Prevent misusing the meter
• After receiving the meter, please check for damage that may have occurred
during the transport.
• If the meter has been stored and shipped under hard conditions, please
check and confirm whether or not the meter is damaged.
• Probe should be in good condition. Before use, please check whether the
probe insulation is damaged, and whether metal wire is bare.
• Use the probe table provided with the meter to ensure safety. If
necessary, be replaced with another identical probe or one with the same
specification.
Usage
• When using, select the correct function and measuring range.
• Don't exceed the indicated maximum of each measuring range.
• When measuring circuits with the meter connected, do not touch the probe
tip (metal part).
Instructions manual | 20 www.grupotemper.com