Operating Elements; Trigger Function - Abicor Binzel ABIMIG XX0 Instructivo De Servicio

6 Operating elements

6 Operating elements

6.1 Trigger function

7 Operation
EN - 14
NOTICE
®
• The ABIMIG XX0/XX5 welding torch must only be operated by
qualified personnel (in Germany, see TRBS 1203).
• Please also consult the operating instructions for the welding
components, welding power source and welding torch.
1 Press the trigger on the handle and keep it pressed = contact is made.
2 Release the trigger = contact is interrupted.
3 2- or 4-cycle mode depending on the mode of action of the welding power
source.
1 Open the shielding gas cylinder.
2 Switch on the power source.
3 Switch on the coolant recirculator.
4 Rinse the shielding gas lines.
5 Start the welding process by pressing and holding the torch trigger.
®
ABIMIG XX0/XX5