Replacing Batteries - koban KP 2203 Manual Del Usuario

Replacing Batteries

WARNING
To avoid electrical shock , the
instrument must be power off
and disconnect the lest leads
or any input signals before
replacing the batteries. Never
use the instrument unless the
back cover of the instrument is
fastened completely. Replace
only with same type or rating
batteries.
When the LCD displays the "
symbol, the batteries must be
replaced to maintain proper
operation. Use the following
procedure
www.grupotemper.com
Phase digital power clamp meter
to replace the batteries:
1. Disconnect test leads from any
signals, turn the rotary function
switch to OFF, and remove
the test leads from the input
terminals.
2. Open the battery cover and
remove the battery cover.
Because there is a locked design
in the battery cover. Don't
force the battery cover open,
otherwise the cover is broken.
Refer to Figure 23 for opening it:
Insert a coin into the groove of
the battery cover, press the coin
"
down, then open the cover.
3. Remove batteries and replace
with new batteries which is the
same type or rating.
4. Reinstall the battery cover.
KP 2203
Instructions manual | 57