Using The Selector; Using The Buttons - koban KP 2203 Manual Del Usuario

Using the Selector

Turn the meter on by rotating the
selector to any function as following.
(Table 1. Introducing The Selector)
ITEM DESCRIPTION
OFF POWER OFF. Turn the
meter off
EX- P EXTERNAL POWER SUPPLY.
No use battery, select
tested
voltage signal be power
supply for Active Energy
measure- -ment for long
at one time.
MR RECALL DATA. Recall saved
data in the meter memory.
∑W TOTAL POWER. For display
total power value of three
phase
Φ3 THIRD MEASUREMENT
CHANNEL. For V3 input
terminal measurement
Φ2 SECOND MEASUREMENT
CHANNEL. For V2 input
terminal measurement
Φ1 FIRST MEASUREMENT
CHANNEL. For V1 input
terminal measurement
www.grupotemper.com
Phase digital power clamp meter

Using the buttons

(Table 2. Function Button)
BUTTON IT DESCRIPTION
1 Active Power, Power
kW / PF
Factor Measurement
Button.
2 Apparent Power,
kVA
kVAr
Reactive Power
Measurement
Button.
3 Active Energy,
kWh
TIME
Time Measurement
Button
4 Power Summation
Σ
Button
5 Voltage, Frequency
V / Hz
Measurement
Button
6 Current
A
Measurement
Button
7 Data Transmit
RS232
Button
8
Clear Memory
CLEAR
Button
9 Backlight Button
10
Maximum Value
MAX
Button/ Previous
Record Button
11
MIN
Button/ Next Record
Button
12
SAVE
Instructions manual |
KP 2203
Minimum Value
Data Save Button
37