Operator Safety - Alliance Laundry Systems BF35PV Instalación/Mantenimiento

To provide personal safety and keep the
machine in proper working order, follow all
maintenance and safety procedures presented in
this manual. If questions regarding safety arise,
contact the factory immediately.
Use factory-authorized spare parts to avoid
safety hazards.

Operator Safety

WARNING
NEVER insert hands or objects into basket
until it has completely stopped. Doing so
could result in serious injury.
To ensure the safety of machine operators,
the following maintenance checks must be
performed daily:
1. Prior to operating the machine, verify that
all warning signs are present and legible.
Missing or illegible signs must be replaced
immediately. Make certain that spares
are available.
2. Check door interlock before starting
operation of the machine:
a. Attempt to start the machine
with the door open. The machine should
not start with the door open.
b. Close the door without locking it and
attempt to start the machine. The
machine should not start with the
door unlocked.
F232058
c. Close and lock the door and start a
cycle. Attempt to open the door while
the cycle is in progress. The door
should not open.
If the door lock and interlock are
not functioning properly, call a
service technician.
3. Do not attempt to operate the machine if
any of the following conditions are present:
a. The door does not remain securely
locked during the entire cycle.
b. Excessively high water level
is evident.
c. Machine is not connected to a
properly grounded circuit.
SW012
Do not bypass any safety devices in
the machine.
Never operate the machine with a bypassed
or disconnected out-of-balance switch.
Operating the machine with severe
out-of-balance loads could result in personal
injury and serious equipment damage.
Safety
WARNING
SW010
5