Alliance Laundry Systems BF35PV Instalación/Mantenimiento página 45

Input Power
Block on
Washer-Extractor
8. Cylinder rotation must be clockwise in a
spin step for 35-pound, 50-pound, and
85-pound capacity models. On 135-pound
and 250-pound models, rotation should be
counterclockwise in an extract step. If
rotation is not correct, disconnect power. A
qualified electrician must reverse any two
leads between the AC drive and the main
drive motor. See Figure 27.
If the washer-extractor is served by the
Premium Wet Clean Module, continue the
control function test by following the
procedure listed below.
F232058
Power Supply
R S T
Figure 27
Installation
AC Drive Connections
U V W
Motor Leads
Main Drive Motor
MV001F
43