Assembly Instructions - Pleasant Hearth WILMINGTON OFG321S Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Attach the door handle (K) to the door (J) with one
M4 X 6 screw (DD) and one washer ø4 (EE).
Tighten with screwdriver (II).
Hardware Used
DD
Screw M4 X 6
EE
Washer ø4
II
Phillips screwdriver
2. Post (E) installation
Attach the four posts (E) to the bottom plate (I) with
four M6 X 30 bolts (BB). Tighten with screwdriver (II)
and wrench (HH).
Hardware Used
BB
Screw M6 X 30
HH
Wrench
II
Phillips screwdriver
3. Hang the chain (F) from the posts (E) as illustrated in
figure 3 so that it connects from corner to corner.
When the fire table is fully assembled, the tank will be
placed in the tank hole on the bottom plate (I).
Make sure that the chain (F) is positioned so that it
will not block the tank.
1
K
X 1
X 1
2
X 4
3
9
EE DD
BB
I
F
I
J
E
E