Control Panel - CASO DESIGN 1848 Manual De Instrucciones

Disassembly of grinding/brewing container with filter and lid
Press the button on the side of the lid of grinding/brewing container to lift the lid and to
remove it. On the backside of the lid is a round filterinsert which can be removed. Turn the
container anti-clockwise and lift it up. The filter (3) can be lifted by pulling at its handle (3a).
Please note
► Please remove the jug before disassembly, otherwise coffee ground may infiltrate the
jug.
Assembly of grinding/brewing container with filter and lid
Replace the round filterinsert on back of lid of grinding/brewing basket.
Place the grinding/brewing container oblique, press down and turn it clockwise (12) until
the container latches. Take the filter at its handle (A) and place it a position B into the
grinding/brewing container.
Place the lid of grinding/brewing container with steamoutlett to the backside and press it
down, observe that the water tube C is placed into the water inlet D.

13.2 Control panel

1 on/off button with indicator lamp
2 start / pause button
3 selection of amount of coffee beans / coffee powder
4 display
+ -
5 increase setting, reduce setting
6 clock and timer button
48