Phone Mode - Motorola EP350 Serie Guia Del Usuario

PHONE MODE

The Phone Mode allows your radio to communicate to a
telephone line.
It allows the dialing of DTMF digits without the need to press
and hold the PTT button.
Entering and Exiting Phone Mode
1. Configure one of the programmable buttons to Phone
Mode. Press this button to enter the Phone Mode.
2. Press the Phone Mode programmable button again, to
exit the Phone Mode.
Connecting to a Telephone
You can use your radio to connect to a phone line and make a
phone call. To do this, you must press the Phone Mode
Programmable button. The radio will automatically send an
Access Code to a station that connects it to a phone line. After
completing a call, press the Phone Mode Programmable
button again to automatically send a De-access Code to hang
up.
Contact your dealer for details on setting up the radio in phone
mode.
Sending a Phone Number
After pressing the Phone Mode Programmable button, wait for
a dial tone before sending a phone number. You can send the
phone number using one of the following methods:
Method
Phone List
Live Dial *
* Only available on Full Keypad models.
The Phone Conversation
After the call is connected, speak as you would normally do on
your radio. Press PTT to speak and release PTT to listen.
Ending the Phone Call
To end the phone call, press the Phone Mode Programmable
button again. It will automatically send the De-access Code to
end the call.
Steps
Select the phone number you
want to call from the list of
preprogrammed phone list.
Enter the phone number using
the keypad. The radio
transmits each number as you
enter it.
17
English English