Movement LX 150 G4 Manual De Instrucciones página 83

ASSEMBLING THE EQUIPMENT
CAUTION!
Before starting to assemble the treadmill it is necessary to be attention to the
following:
•Check that the packaging is not damaged and the parts and components of
the equipments are not broken in any way.
•It is recommended that the treadmill is taken out from its packing in the area
where it is to be assembled.
•The assembly area should be clean.
•The floor ought to be flat and a leveled to avoid destabilizing the treadmill.
•The space around the treadmill should be kept free from anything as
described in this Manual (see the chapter on the technical specifications)
•It is advised that the treadmill be assembled far from any place that is damp
and away from sun light in order to avoid damage to the equipments
electrical components.
In order to assemble the equipment the following tools are needed:
Fixed
wrench 13
Allen n° 5
Medium torque
Allen n° 6
Allen n° 8
NOTE: Check the torque table to know how to tighten the screws in a correct way.
Phillips
Screwdriver
Thread Lock
For this assembly,
we recommend
that it be done
by two people
TORQUE SPECIFICATION OF SCREW
TIGHTENING TABLE
Diameter
21
/
/
ICONS
50%
Do not
completely
tighten the screws
100%
Do the final
tightening
of the bolts