MAINTENANCE
RECOMMENDATIONS
In order to maintain the durability of your treadmill, it is important to follow a series of
precautionary steps to avoid any type of problem in the treadmill or users and/or third
parties. If one part breaks, do not allow the equipment to be used until the part in
question is repaired.
CLEANING
On a weekly basis, clean the equipment using a soft, nylon brush. Vacuum up any dust
that has accumulated under the equipments which may affect the functioning of the
equipment.
Always use water, soap and a damp cloth to clean the handrail coating and the equip-
ment before and after the training. Never use acidic cleaning products. Never throw
water over the equipment or apply liquid spray even with the use of a soft and wet cloth.
Wait for the equipment to dry completely before starting your exercise.
FRONT FAIRING
Often the user may end up stepping on the front fairing by
accident, so there may be a break. In case of any damage the
front fairing must be changed immediately. Do not rest your
foot on the front fairing or objects.
DANGER!
If the front fairing is not changed, it can cause serious or fatal accidents to the
user because the front fairing is broken and the motor of the conveyor is
exposed, allowing the user to step on and the fairing to give way.
SIDE STIRRUPS
Because the user can step on the side stirrups at the
beginning or end of the exercise, it can suffer damage over
time. If the stirrups are damaged in any way, immediately
replace the damaged part(s).
BELT
It is not possible to use the equipment without the belt.
Never try to change the belt. In case of breakage, contact the
Manufacturer or Authorized Dealer
48
/
/