KENMORE ELITE 790.4637 Serie Manual Del Usuario página 14

Setting Warmer Drawer Controls
To Set the Warmer Drawer & Bread Proof Controls:
The control and indicator lights for the Warmer Drawer Bread Proof features are
located on the control panel. The temperatures are approximate, and are
designated by HI (high), MED (medium) and LO (low) and BREAD PROOF.
,
Touch the ON,OFF pad at the Warmer Drawer control position. The Warmer
Drawer indicator light will flash. Note: If no further pads are touched within 25
seconds the request to power the Warmer Drawer ON will clear.
,
Set the desired power level. Touch @ once to turn ON the power level for HI
(see Figure 2) or @
to turn ON the power level for LO (see Figure 4). The
Warmer Drawer indicator light located above the ON/OFF pad will turn ON
steady.
,
Each touch of the @ or _ pads will decrease or increase through 6
power levels from HI (see Figure 2) to MED (see Figure 3) to LO (see Figure 4)
and to the Proof bread feature (see Figure 5). If the Warmer Drawer is set at
the LO setting and the 0 pad is touch again the Proof bread feature and
indicator light will be set (see Figure 5 and bread dough preparation instructions
on this page). To return to standard Warmer Drawer setting touch @pad at
least once. Note: For best results, preheat the Warmer Drawer before adding
the food or bread dough. An empty drawer will preheat in approximately 15
minutes.
4. When the food is ready for removal, touch the O,_OFF pad once to turn the
Warmer Drawer or Proof bread feature OFF. The Warmer Drawer indicator light
will turn OFF.
Preparing Bread Dough for the Warmer Drawer
The Warmer Drawer has a Proof Bread feature that can be used to
help prepare bread dough. The recommended length of time to keep
bread dough in the Warmer Drawer is about 45-60 minutes. Be sure
however to follow the recipe's recommended times.
The prepared bread dough should be placed in a large bowl since
the dough will nearly double in volume. Arrange the Warmer Drawer
Rack in the downward position (see Figure 6). Place the bowl on the
rack in the Warmer Drawer and follow the Warmer Drawer and Proof
bread Control setting instructions at the top of this page.
Note: For best results, do not operate the main oven while using the
Proof Bread feat u re.
HIo
0
MED eD
0 PROOF
BREAD
LO o
O
ii i i_i
ON/OFF
WARMER
DRAWER
Figure 1
HIo
0
MED
PROOF
BREAD
LO _ c->
Figure 2
HI c-p
MED c_
> PROOF
BREAD
LO _ c_
Figure 4
HI c->
c>
MED 9D,
,ID
Lo
Figure 3
HI_
MED c_
Figure 6
PROOF
BREAD
C-> PROOF
BREAD
LO <->
Figure 5
Note: The Warmer Drawer is inoperable during the self-clean
cycle.
14